Suspension offerings for the 4x4 Sprinter by Van Compass.
Take advantage of the empty space above the overhead console of your Ford Transit. This bolt in overhead shelf installs easily using the original bolt locations securing the overhead console to the vehicle. Constructed of strong, lightweight, 1/8” thick 5052 Aluminum, this shelf weighs just 15 lbs and provides an abundance of additional storage.
The rear lip on the shelf not only prevents goods from sliding off the back of shelf, but is also a great place to secure L-track for even more versatility.
2 small holes need to be drilled in the headliner for rear support tabs to be installed. All hardware is included. Product ships as a raw aluminum piece, install as is or paint / powder coat the color of your choice to match the interior of your vehicle for a truly custom touch. Click below for detailed instructions on how to add this versatile shelf to your Ford Transit.
* We recommend storing lighter items like clothes or gear packs keeping the weight limit to 50lbs
Convert your adventure van with components that will go the distance. Bolt in this lightweight, robust kitchen galley from Van Compass. Available in either 57” or 44” widths, this modular galley is manufactured from US made 5052 Aluminum and bolts together in about an hour with simple hand tools. Using a symmetric design around the Indel / Truckfridge 130 allows for the fridge to be placed on either side of the galley and opens up a plethora of floor plan configurations. Cut the counter top yourself to fit the sink / cooktop combo desired to quickly complete a custom galley installation without the hassle of having to build an entire unit from scratch.
Stainless steel hardware is included along with detailed assembly instructions which can be viewed here on this webpage. The 57” wide galley weighs in at just 100 lbs without the fridge. Each galley also includes a “Fridge delete panel” which bolts in place on the galley for customers desiring to use a different style fridge elsewhere in the vehicle. Finish off the top of the galley with any sort of wood / Formica / plastic material or just leave the bare aluminum top to give the galley a truly personalized, custom touch matched to your van’s interior.
This is a DIY galley and is up to the installer on how / where to install in the vehicle. Van Compass strongly suggests through bolting the galley into the vehicle’s floor or securing it to properly fastened L-tracking in the vehicle. Refrigerator, wood counter top, and sink / cooktop are not included. See images below on finished galleys for ideas on cooktop / sink placement. Detailed dimension drawings below can be used for reference in determining which galley will work best for you. Van Further with VC Hardware.
Product dimensions: L x W x H
44" x 20" x 34" - $1500
57" x 20" x 34" - $1700
Add protection and peace of mind while exploring in the back country with the Van Compass rear differential skid plate. Loss of gear oil due to a cracked housing or leaking cover can be catastrophic to the rear differential. This skid plate protects the driveshaft u-joints, cast iron differential center section and lower portion of the thin sheet metal differential cover. Constructed from 3/16" steel and powder coated for corrosion resistance to provide a strong, smooth surface to slide over obstacles on the trail. The skid system bolts on in minutes with simple hand tools. Detailed instructions and all necessary hardware is included. Gear oil changes can still easily be performed without skid plate removal.
*COMPATIBLE WITH 2500 MODELS ONLY
The bolt-on Striker 4x4 Sprinter 2.0” suspension lift system provides clearance for larger tires and offers additional ground clearance under the van. Additional traction from larger tires and ground clearance helps to avoid obstacles on the trail to your remote campsite.
The Striker system retains the stock vehicle suspension geometry, payload rating and ride quality. All of the suspension lift system components are constructed of high quality materials here in the USA and are powder coated for durability and corrosion resistance.
With this lift kit, 315/75/16 (35”) tires can be fitted with the following conditions met:
- Removal of the front mudflaps
- Slight trimming of the rear of the front fender
- Trimming of the front bumper and front inner fender well liner.
- Minimum of a 9/16” (14mm) wheel spacer be installed on factory steel wheels with 54mm of offset or any other wheel that has comparable offset. This is for tire clearance between the inside of the tire and the strut and rear inner fender. ** Sold separately
- Note; this could be omitted with an additional 9/16” (14mm) offset and aftermarket wheels.